Product Specification:

• Fastener: JT3-D6-H 5.5/6.3mm x Length
• Washer: DMT 85-7 (E)
• Embedment: Full thread engagement required
• Timber Embedment: Minimum embedment 40mm

Product Specification:

• Anchor: DMH 8mm x Length (E)
• Washer: DMT 80 (E)
• Embedment: 40-80mm with 8mm pilot hole

]]> https://polyplas.com.au/product/dh2-insulation-anchor/ Tue, 15 Apr 2025 00:39:21 +0000 https://polyplas.com.au/?post_type=product&p=3018 The DH2 insulation anchor is a two-part, high-grade plastic washer/shaft combination. The perimeter fix anchor is set by hammer and specified for fixing insulation to concrete, brick, and block.

Perimeter Fixing for Insulation refers to the perimeter of the insulation sheet. For perimeter fixing use the recommended combination of an EJOT plastic washer with the suitable anchor/fastener shown in the downloadable guide

Product Specification:

• Fastener: SW8-R 4.8mm x Length
• Washer: SBV-6.5/90
• Embedment: Full thread engagement required, plus 20mm protrusion for sheathing board
• (Hex Head) 8mm AF

Product Specification:

• Fastener: JT2-D6 5.5/6.3mm x Length
• Washer: SBV-6.5/90
• Embedment: Full thread engagement required
• Perimeter Fix (Hex Head) 8mm AF

• 25mm EPDM Aluminium Bonded Washer to help prevent water entry
• Fast and Easy application into steel between 1mm and 5mm thick (Metal Teks®) or 3-12mm thick (Series 500 Teks®)
• Climaseal® 4 corrosion protection available
• Higrip® Feature grips to the roof sheeting to create a positive join preventing water entry and over drilling. Stops the roof sheet moving down the shank when the roof is walked on

Sam Adams | Commercial Manager 

• Fast and Easy application into steel between 1mm and 5mm thick (Metal Teks®) or 3-12mm thick (Series 500 Teks®)
• Climaseal® 4 corrosion protection available
• Higrip® Feature grips to the roof sheeting to create a positive join preventing water entry and over drilling
• Stops the roof sheet moving down the shank when the roof is walked on

Sam Adams | Commercial Manager 

The innovative design of the Opticore head provides installers with a choice of drive tools. An internal Torx 30 Plus creates a fast and secure installation where stitching or fixing to cold rolled steel. Once driven home the torque bit strips out the nylon teeth witin the head creating a perfect fix every time.

An 11mm bi-hex external drive bar provides an improved ‘surface over fix’ ratio, creating a far more responsive installation into hot rolled steel and timber substrates.

The integral Opticore head design is manufactured in high strength moulded nylon. The ‘cutting fins’ are unique to the Opticore patent, and create the smooth coring of the panel’s insulation. On secure ‘pull-up- of the fastener into the substrate, the fins simply snap away without any compromise to the integral lining.

The Opticore head is designed to encapsulate all high performance fasteners from our self-drilling range, creating a fast one-step fix for stitching, light section steel, heavy secion steel and plywood.

Opticore Drive Bars

Part Codes:

Opticore External Drive Bar 11mm Bi-Hex

Opticore Internal Drive Bar Torx 30Plus

Opticore 1/4” EXT Drive Bar 11mm ext

The innovative design of the Opticore head provides installers with a choice of drive tools. An internal Torx 30 Plus creates a fast and secure installation where stitching or fixing to cold rolled steel. Once driven home the torque bit strips out the nylon teeth witin the head creating a perfect fix every time.

An 11mm bi-hex external drive bar provides an improved ‘surface over fix’ ratio, creating a far more responsive installation into hot rolled steel and timber substrates.

The integral Opticore head design is manufactured in high strength moulded nylon. The ‘cutting fins’ are unique to the Opticore patent, and create the smooth coring of the panel’s insulation. On secure ‘pull-up- of the fastener into the substrate, the fins simply snap away without any compromise to the integral lining.

The Opticore head is designed to encapsulate all high performance fasteners from our self-drilling range, creating a fast one-step fix for stitching, light section steel, heavy secion steel and plywood.

Opticore is EJOT’s unique and patented integral nylon head, designed to encapsulate fasteners from our high performance self-drilling range. 

Opticore is engineered to provide a dual drive fastening system that enables rapid self-coring of membrane faced insulation panels, and a secure fix into hot and cold rolled steel, and timber.

Key to the Opticore’s advantage is the coring action created by strategically placed cutting fins. These simply snap free as the fastener ‘pulls up’ and the nylon to metal relationship means there is no compromise to the integrity of the panel’s lining skin.

The composition of the Opticore head also provides significantly better thermal retention values over metal counterparts.

Opticore Fasteners in Carbon Steel

Corrosion resistance finish with ‘EJOT Climadur’ organic coating.

Part Codes:

Ø x L (mm):

5.5 x 32: LS 5.5 x 32

5.5 x 38: HS 5.5 x 38

6.3 x 45: TS 6.3 x 45

6.3 x 25: SF 6.3 x 25

Opticore Fasteners in Stainless Steel

High quality stainless steel, grade 304 St/St, ISO group A2, DIN Werkstoff 1.4301.

Part Codes:

Ø x L (mm):

5.5 x 25: JT3-3-5.5 x 25

5.5 x 40: JT3-12-5.5 x 40

6.3 x 50: JT3-2-6.3 x 50

6.3 x 25: JT3-2-6.3 x 25

EJOT COLORFAST Super-SAPHIR CF19 JT3-D-12H Stainless Steel Bi-met Fastener (11mm Bi-Hex):

EJObar is EJOT’s membrane-friendly solution for securing ir carrying mechanical & electrical essentials through to lightweight solar PV and thermal installations.

Fixing EJObar is easy. Installation is either by hot welding or for some applications, it can be simply used free standing as a carrier system.

EJObar has been subjected to rigorous strength-of-weld tests at the EJOT Applitec Development and Testing Centre. More than 20 reinforced PVC membranes were subjected to a like for like programme of tensometer procedures using a 150mm long section of EJObar.

EJObar surpassed all reasonable criteria achieving an average 3.4 kilonewton loading for PVC membranes.

The following leading PVC membrane manufacturers formally approve PVC EJObar: Renolit, Flag Soprema, Fatra, Wolfin for specific solar installations – and Iko for Mechanical and Electrical applications.

Part Codes:

300 mm: PVC EJObar 300 mm

500 mm: PVC EJObar 500 mm

1000 mm: PVC EJObar 1000 mm

1500 mm: PVC EJObar 1500 mm

3000 mm: PVC EJObar 3000 mm

End Caps: PVC EJObar End Caps